ALTHOUGH jump-starting is the go-to solution for a flat battery, most drivers don’t know it can be dangerous if done incorrectly. Before hauling out the cables, consult Battery Centre’s step-by-step guide on how to jump-start your car the right way:

 Safety check

Firstly, read the car manual. Some cars have specific procedures for jump-starting. This may include information on the location of the battery (it may not be in front). Some newer models don’t allow jump-starts at all and you could risk voiding your warranty if you attempt it.

If you can, wear gloves and eye protection. Vehicle batteries contain sulphuric acid and other chemicals which can be dangerous. Keep a torch shining on the engine if you’re jump-starting in the dark, to ensure cables and any other parts are kept out of harm’s way when the engine turns on.

Use quality jumper cables

Use only high-quality cables that are in good working condition, colour coded and at least 2.5 metres long. Cables in poor condition can cause sparks and fires.

Prepare the cars

Once both cars are ready, prepare to hook the cables. Make sure the cars aren’t touching (this can create a shock) but are parked close enough for the cables to reach both batteries.

Switch off electronics in both cars, including radio, aircon and any accessories that drain the battery. Turn off the ignition in both vehicles – this prevents electrical overload.

Hook the cables

Hook the cables in the right sequence. Start by identifying the positive (+) and negative (-) terminals on each car’s battery. Double check this before you actually connect the cables, or you could cause serious damage to the vehicles’ electrical systems.

Once the cables are prepared, connect a red cable to the positive (+) post of the flat battery and connect the other end of the cable to the live battery’s positive (+) post. Also connect the end of the black cable to the live battery’s negative (-) post and connect the other end to the engine of the car with a flat battery.

Move away from the open hoods and start the engine in the live car first. Wait a few minutes, then try to start the other car. If the car doesn’t start, switch off and re-check the connections. Once you get a start, leave the car running for at least 20 minutes to recharge the battery.

YOU MIGHT ALSO BE INTERESTED IN: Incorrect jumpstarting can damage your car’s computer

Consult the specialists

If your car fails to start after a few attempts, it could mean your battery is faulty or needs to be replaced. This could be a broken fuse, corrosion or a faulty alternator or start connection. Most car batteries last for three to five years and should be replaced regularly thereafter.

If you’re unable to jump-start your car, call your nearest Battery Centre for a free battery check. Battery Centre conducts thorough battery checks free of charge and can replace the battery quickly if necessary.

By following these instructions, using your jumper cables safely and consulting Battery Centre, your battery – and therefore your car – will run better, safer and last longer.

HAVE YOUR SAY

Like the South Coast Herald’s Facebook page, follow us on Twitter andInstagram

For news straight to your phone, add us on BBM 58F3D7A7 or WhatsApp 082 421 6033